Broadband in M26 1FT

This is the area guide for M26 1FT, located in Bolton. It covers connectivity, property, safety, and local services. Every claim links back to a specific data point. Read on for the detail.

55.6% of premises at M26 1FT can access superfast broadband. The UK average is 93%. There is room for improvement here. Ultrafast broadband (100 Mbps+) reaches 55.6% of properties. Over half of premises have access to faster tiers. Gigabit-capable connections cover 55.6% of premises. Gigabit is available but not yet widespread at this postcode. Full fibre (FTTP) is available to 55.6% of addresses. FTTP rollout is underway but not yet complete. The maximum download speed recorded is 1000 Mbps. That is well above the UK real-world average of 69 Mbps.

The speed distribution at M26 1FT tells a more detailed story than headline figures alone. 33.3% of connections fall in the 2 to 5 Mbps range. 11.1% of connections fall in the 5 to 10 Mbps range. 55.6% of connections fall in the 300 Mbps or faster range. 33% of premises get less than 5 Mbps. That is not enough for reliable video calls or streaming. Over half of connections exceed 300 Mbps. That supports multiple 4K streams, large file transfers, and cloud gaming without issue.

Translating the numbers at M26 1FT into daily use gives a clearer picture. Multiple 4K streams can run simultaneously. Netflix, Disney+, and iPlayer should all work without buffering even with several devices active. Remote working is viable here. Video conferencing, cloud documents, and VPN connections should all perform well.

FWA broadband has not reached M26 1FT yet. Satellite services like Starlink or 4G home broadband routers can fill the gap where fixed-line options are limited.

The USO guarantees every UK home at least 10 Mbps. At M26 1FT, 0% of properties do not meet this threshold. Every property here meets the minimum standard. That is not the case everywhere. Next-generation access (NGA) reaches 55.6% of the area. NGA typically means speeds of 24 Mbps or above.

0 crimes were reported near M26 1FT in the most recent month. The level is relatively low. Data comes from Police.uk at LSOA level. One month is a snapshot, not a trend.

Flood risk at M26 1FT is rated Medium (Zone 2/3). Check Environment Agency flood maps for detailed information. Specialist flood insurance may be needed. Air quality is rated Fair with PM2.5 at 2.6 micrograms per cubic metre.

Bolton station is the closest rail link at 4.1 miles from M26 1FT. You will need a car or bus to reach the station. Park-and-ride may be available. Bury is the next closest at 4.2 miles. Salford Central offers another option at 5.9 miles.

The most common council tax band near M26 1FT is Band C. The billing authority is Bolton. The three most common bands are A (30%), B (25%), C (20%). Band A corresponds to 1991 property values of up to £40,000. Current values are typically much higher. The concentration in lower bands suggests a mix of smaller and mid-range properties.

4G outdoor coverage at M26 1FT reaches 99%. Indoor 4G drops to 85%. Some signal loss indoors is normal. Most calls and data should still work inside. 5G has not yet reached this postcode. Coverage is expanding but remains concentrated in urban centres. Coverage data covers EE, O2, Three, Vodafone. Check each operator individually, as coverage varies by network. Strong 4G coverage combined with limited fixed broadband means 4G home broadband could be a practical alternative here.

Suitability scores for M26 1FT: remote working 85/100, family 80/100, value 50/100. Strong broadband makes this area well suited to home working.

The local authority for M26 1FT is Bolton. The M26 postcode area contains 837 postcodes on this site. Superfast broadband across M26 ranges from 0% to 100%. M26 1FT is below the area average of 98%.

How does M26 1FT compare to its neighbours? M26 1GT (0.14 miles, Bolton) has 50% superfast coverage and 50% gigabit. M26 1FW (0.19 miles, Bolton) has 100% superfast coverage and 100% gigabit. M26 1AS (0.17 miles, Bolton) has 33.3% superfast coverage and 33.3% gigabit. M26 1AT (0.15 miles, Bolton) has 100% superfast coverage and 100% gigabit. Neighbouring postcodes tend to have better superfast coverage.

When choosing a broadband provider at M26 1FT, check what technology reaches your specific address. Availability varies by street and sometimes by building. Where full fibre is available, it typically offers faster and more reliable service than part-fibre connections. Compare contract lengths, total costs over the term, and exit fees. The cheapest monthly rate is not always the best deal.

Every part of Bolton has its own feel. This data gives you the factual starting point. A visit fills in the rest.

Pulling the data together for M26 1FT, here is what stands out. Both fixed and mobile connectivity are strong. Backup options exist if one connection fails.

Data sources include Ofcom (broadband and mobile), Land Registry (house prices), Police.uk (crime), Ofsted (schools), Environment Agency (flood risk), and Open-Meteo (air quality). Council tax data comes from the Valuation Office Agency. EPC data is from DLUHC. Transport data uses NaPTAN. Speed distribution figures are from Ofcom Connected Nations. All figures are the latest available at the time of writing.

Data is a starting point for Bolton. Walk the streets at different times. Test your mobile signal. Check parking, noise levels, and the feel of the neighbourhood. Run a speed test on the actual connection. Some things only a visit can reveal.

This covers the key data for M26 1FT. Broadband, property, schools, safety, and local services all in one place. For area-wide trends, see the Bolton hub page. Bookmark this page and check back as new data arrives.